Feature:

Machine configuration
A. One 80/28 single-screw extruder:
1) Barrel screw:
Screw diameter: 80mm Aspect ratio: 28:1 Screw material: 38CrMOALA
Heat treatment method: Nitriding treatment Nitriding depth: 0.4-0.7mm Surface hardness: HV940-1050
2) Barrel heating: electric heating, heating material: stainless steel heating ring, barrel cover is bright stainless steel plate;
3) Main motor power: 30KW, speed regulation mode: frequency converter stepless speed regulation.
4) The deceleration adopts a special gear box with hard tooth surface.
5) The whole machine is divided into 10 zones for temperature control, including 5 zones for the fuselage and 5 zones for the die head. The temperature controller is used to control the temperature accurately.
6) Electrical appliances are provided by Chint.
7) Applicable materials: PP pellets, 60-100 kg output per hour,
8) Hydraulic manual screen changer can change the screen without stopping. Equipped with hydraulic station.
9) 2 sets of molds. It can produce 2 strips with a width of 4-13mm and a thickness of 0.3-1.5mm; or a piece of 16-32mm.
B. Stainless steel cooling water tank 1.5 meters
The box body is made of 304# stainless steel, and the lifting movement is driven by a hand wheel.
c. Five-roller traction machine, motor 0.75KW, frequency converter speed regulation, line speed 0.75-7.5m/min.
D. Hot air tank 4 meters, stainless steel cooling water tank 4.5 meters
Made of 304# stainless steel 1.5MM thick plate. Water removal motor 0.37KW, lift motor 1.1KW.
The heating power of the hot air tank is 16KW.
E. One five-roll stretching machine:
Tensile power: 5.5KW, speed regulation mode: micro-energy frequency converter stepless speed regulation, line speed 10-100m/min.
F. One roller clamping machine
Power 1.1KW, line speed 120m/min. Inverter speed regulation.
G. 2 winders
The speed is adjusted by the torque motor, which is stable and uniform.
H, covers an area of 18 meters * 1.5 meters, 2.5 meters high. The total power is 65KW. Cooling water 2T/hour. Total weight 4.5T.